DSL Modem Settings
This is where you can find useful information to set up
your DSL modem to access our Woosh broadband network.
Click on one of the following for details:
- DSL generic modem settings
- Dynalink RTA 1025W / 1320 – settings
- Useful Links for non-Woosh supplied modems / routers
DSL Modem Settings
Please enter the following information
into your modem / router should you be prompted to do so.
If using the links for third party modem support from the links page,
please ensure you enter the details given here and not
the username / password details provided in the tutorial.
| Username |
yourusername@woosh.co.nz
This should be your normal Woosh username, and it should be entered
in the form of an email address. For example, MaryJane@woosh.co.nz
|
|
Password
|
yourpassword
this should be the same password you use for setting up your Woosh Bundle of Joy account
|
|
Encapsulation
|
PPPoA, VC MUX
(Protocol 'PPPoverATM', also known as 'PPPoA', Multiplexing Method ‘VC-Mux’ or VC Based) RFC 2364
|
|
PVC
|
0
|
|
VPI
|
0
|
|
VCI
|
100
|
|
Service Category
|
UBR without PCR (peak cell rate)
|
|
Modulation:
|
Automatic/Multimode
Or
|
ADSL:
|
G.dmt/G992.1
|
|
ADSL2:
|
G.992.3
|
|
ADSL2+:
|
G.992.5
|
|
|
ADSL2/ADSL2+ where available on the Telecom network.
Automatic/Multimode will connect with the fastest available modulation.
|
|
|
MTU
|
Between 1462 and 1500
|
|
DNS
|
Auto Assign
| Or |
|
Primary DNS:
|
202.74.207.253
|
|
Secondary DNS:
|
202.74.207.254
|
|
Dynalink RTA 1025W / 1320 – Settings
STEP 1: On your computer, open a web browser (e.g. Internet Explorer or Firefox).
Type http://192.168.1.1 into the Address Bar. Press Enter.
STEP 2: When prompted, enter:
Username: admin
Password: admin
Click OK.
STEP 3: Click on the Quick Start icon on the Top of the router interface
STEP 4: Click on the Quick Setup option from the Left side of the router interface.
STEP 5: By default the modem will automatically scan & detect the Internet Connection (PVC).
Click Next to continue.
The Auto Scan should detect the PVC within 30 seconds, check that it detected PVC(0/100): Detected as PPPoA VC MUX.
If the Auto Scan fails or detects incorrect settings:
Please restart the Quick Setup and un-tick Automatically Scan internet
connection, then manually enter VPI 0, VCI 100.
Click Next to continue.
STEP 6: Click Next for next step.
STEP 7: Click Next for next step
STEP 8: Enter the following information:
PPP User Name: yourusername@woosh.co.nz
PPP Password: yourpassword
Click Next for next step.
STEP 9: Click Next for next step.
STEP 10: Click Finish. The Modem will now save the settings then reboot and attempt to connect.
Useful Links for non-Woosh supplied modems / routers
Consult your user manual that was supplied with the router.
Dynalink Support
Linksys
D-Link
Support & Contact details
http://www.dlink.co.nz/tech
Thompson
Products and support
http://www.thomson.net/GlobalEnglish/Products/dsl-modems-gateways/residential_wireless/thomson_tg585v7/Pages/default.aspx
PDF link:
THOMSON TG576 v7 and TG585 v7, Setup and User Guide
http://www.thomson.net/GlobalEnglish/customer-service/SpeedTouchDocuments/xDSLGA-Wireless_SetupUserGuide_TG585_en_102008.pdf
